Security Camera Installation Mistakes – With the increase in burglaries and threats, people have considered several means and methods of improving security. One of the ideal methods to improve the security of your homes, buildings, and premises is to install security and surveillance cameras. There are hardly any replacements for these security systems, thus maintaining its priority among the people.
But installing these cameras is not enough to improve safety and security; properly installing the right security system is a must. After making the right choices and buying the appropriate security camera, people still struggle to improve security. It is because they are not installing these systems correctly, and they are not letting the technical experts do the job to avoid installation mistakes.
Dig deeper into this article to get familiar with the mistakes committed while installing security cameras.
Top 6 Security Camera Installation Mistakes You Must Avoid
If you want your security systems to work correctly and as per your needs and requirements, then they have to be of good quality and standards. But these standards are not limited to the quality of the system but also to the installation. Error-free installation of these security systems is a must to get error-free, clear results and camera recordings.
Following are a few security camera installation mistakes you need to stop making when installing security cameras on your premises.
1. Poor camera positioning
The positioning of the camera is one of the most important things when getting clearer and a better result is the objective. Installing the camera too high or too low are both the biggest mistakes, and you must avoid making such mistakes. Positioning it too high will not give you a better view while installing it too low will make it damage-prone. You should better seek expert help to install these cameras error-free. People opt for security system installation Dubai based expert services to help them get the best security systems and ensure their perfect installation.
2. Not having the correct accessories
For many people, security cameras may seem to be very simple and consist of a single object or system. But in reality, there are several components of these security systems that need to be installed correctly for proper working. When installing these cameras, people usually forget other accessories and essentials that are important for the cameras to work properly. When buying and installing these cameras, make sure you have all the accessories required for the proper installation and working of the cameras.
3. Not performing the dry run
Before you begin installing the security cameras, it is a must to check each and every component that you will be installing. The failure of one component will fail the entire camera, and you will fail to identify the problem. The testing of each component will help you analyze and check the working and performance of every single object accessory. If there is not a problem with any of the components and still the camera does not work, then it is because of the Ethernet cable. But these problems and solutions are unknown if you make the mistake of not testing the components.
4. Not keeping future needs in mind
It is possible that, at the moment, you do not need any extra ports or channels, but your need may expand in the future. When buying and installing security systems like security cameras, you need to consider your need for growth. Opting for closed security systems will limit you to a few DVR/NVR, thus narrowing down the chances of adding more channels. We can say that the biggest installation mistake is the selection of the wrong option to install.
5. Ignoring the night vision
The recordings you get through the security cameras should be clear, and they are not too dark to identify the faces or any other activity. Usually, people check the working and result quality only for the daylight and ignore the night vision. For enhanced night vision, you should always install cameras around the lights so that you have a good quality recording. When installing cameras around the light is not possible, then you must go for installing the lights around the cameras.
6. Installing it yourself
One of the biggest mistakes people commit is that they prefer installing the cameras on their own without any help. There are a lot of things associated with the installation of these security systems that require technical expertise and skills. Even if you have purchased an expensive camera, its working will still depend on how it is installed. It is better to leave this job to the experts to get it done the way it should be. You can hire the security system installation Dubai located expert services to avoid mistakes you would have made installing these systems.
If you want to ensure the security of the buildings and the surroundings, then the installation of security systems like security cameras is crucial. It is important that you hire experts to design the networks and install these security systems within these networks to avoid security camera installation mistakes.
Read more about: technology